KINGRIP
Specifications
Downloads
Videos
| Model name | KINGRIP |
| Compatibility | BKIN KINARM End-Point Lab |
| Handle dimensions (H x L x W) | 155 x 42 x 36 mm |
| Handle rotation angle | ±160 degrees |
| Handle maximum load | 500 N |
| Handle maximum rotation torque | 3 Nm |
| Finger contact surface dimensions (D x W) | Diameter 30 x 25 mm |
| Measuring range (GF, LF) | 100 N, ±50N |
| Overload range (GF and LF) | 200 N |
| Sensitivity (GF and LF) | 80 mV/N |
| Noise (GF and LF) | < 40 mN (RMS) |
| Linearity (GF and LF) | < 0.3 % |
| Precision (GF and LF) | 0.2 % (RMSE) |
| Materials | Aluminum handle, brass contact surface, ABS cover |
| Amplifier | 19 inch rack enclosure 8 channels: 2x left GF, 2x right GF, 2x left LF, 2x right LF Filter: Bessel 8-pole low pass filter, cut-off frequency of 500 Hz Output: 0 – 10 V, single ended, ground referenced Supply: 115 V / 60 Hz / 200 mA or 230 V / 50 Hz / 100 mA |
| Interfaces | Left and right finger detection Zero-load button & digital input (5V TTL isolated) Analog force output: 8x 0-10V signal on 9-pin Sub-D |
| Model name | KINGRIP |